GlobalFix™ iPRO sports a digital display that allows you to see all of the beacon's operational activities. The screen displays GPS LAT/LON, operating instructions, usage tips, transmission bursts as well as battery power.
iPRO makes self-testing your beacon simple and easy to understand with the digital display visually walking you through the self test step by step; no more relying on listening to beeps and LEDs.
The GlobalFix™ iPRO is also the first EPIRB that offers Dual GPS Technology. Interface your iPRO to your onboard GPS to ensure that your LAT/LON is stored inside so the coordinates are transmitted in the first data burst. iPRO's internal GPS is optimized for cold starts and is tested and refined at ACR's GPS Simulation Center so that it will pinpoint your exact location faster than standard GPS enabled EPIRBs.
ACR Globalfix iPro 406 GPS EPIRB cat I
- Category I Automatic Release
Size:(no antenna) 7.0 X 4.2 X 3.6” (17.7 X 10.7 X 9.1 cm)
Weight:20.5 oz (581 g)
Digital Display: Yes
GPS: Internal GPS and NMEA GPS Interface
Battery: Class 2 (non-hazmat) lithium batteries
Replacement due six (6) years from date of manufacture or five (5) years after beacon is placed into service, whichever is first, or after emergency use
Material High impact UV resistant polymer
Activation: Out of bracket and wet, or manually
Waterproof: 33 feet (10 m) @ 10 min. Exceeds RTCM standard
Output Power: 6.3 W +/-2dB (406.037 MHz) 50 mW +/-3dB (121.5 MHz)
Operational Life: 48 Hours minimum @ -4°F (-20°C)
Typical Performance: 65+ hours @ -4°F (-20°C); Longer in higher ambient temperature
Operating Temp.: -4°F to +131°F (-20°C to +55°C )
Storage Temp.: -30°F to + 158°F (-34°C to +70°C)
Approvals: Cospas-Sarsat, FCC, MED, IC Acceptances: USCG Meets: GMDSS, RTCM, IEC, and IMO standards
406Link.com 420 satellite detectable basic self tests